Samsung Washing Machine Error Codes And Useful Solutions

With the Samsung washing machine error codes, you can easily find solutions to various issues.

Samsung Washing Machine Error Code 4E – Water Not Supplied to Washing Machine


  • Water supply valve not open.
  • Water supply cut off.
  • Insufficient water pressure to reach the machine.
  • Water supply hose blocked causing water flow obstruction.


  • Check if the water supply valve is open, ensure the water supply is active.
  • If water pressure is too low, consider using a booster pump.

Samsung Washing Machine Error Code 5E – Drainage Pipe Issue


  • Drainage pipe clogged due to obstruction.
  • Drainage pipe twisted at a section, preventing water from flowing out.


Check the drainage pipe for any blockage or twisting.

Samsung Washing Machine Error Code UE – Washer Can’t Spin Clothes


  • Imbalance detected in the drum due to uneven distribution of laundry.
  • Washer not leveled properly on the floor.


  • Pause the machine, open the lid, and redistribute the laundry evenly in the drum.
  • Adjust the washer to be level on the floor.
  • Ensure even distribution of laundry in the drum.

Samsung Washing Machine Error Code 1E 0E – Water Overflow


Software error in the control board.


  • Restart the machine after the spin cycle is completed.
  • If the issue persists, contact support for technical assistance.

Samsung Washing Machine Error Code CL dE – Child Lock Activated

Cause: User did not press Start/Pause button.

Solution: After the draining process, close the washer door and restart.

Child lock mode prevents the machine from operating.

Samsung Washing Machine Error Code LE – Water Leakage


  • Drain hose output positioned higher than water inlet, causing water buildup and leakage.
  • Drain hose clogged by obstruction.


  • Check the drain hose.
  • If no obvious issues are found, contact the service center for assistance.

Samsung Washing Machine Error Code cE/3E – Hardware Malfunction

Cause: Some component in the machine is malfunctioning.

Solution: Temporarily unplug the machine and call the manufacturer for technical support.

If a hardware issue is suspected, seek assistance from professionals.

Samsung Washing Machine Error Code Sd/Sud – Excessive Foam in Machine

Cause: Sensor detects excessive foam buildup in the drum.

Solution: This is a normal occurrence during usage, just wait for the foam to dissipate and the error message will disappear.

Samsung Washing Machine Error Code Ub – Spin Function Not Working


  • Imbalance detected inside the drum.
  • Hardware malfunction affecting the spin function.

Solution: Adjust the position of the washing machine.

Samsung Washing Machine Not Operating


  • Pause the machine, open the lid, and evenly distribute the laundry inside the drum.
  • If a hardware issue, contact the manufacturer for assistance.
  • Check if the washing machine is plugged in or if there’s a power outage.
  • Check if water supply is available and faucets are open.


  • Check the power supply, ensure the washing machine is plugged in.
  • Check the water supply, ensure the water supply valves are open.

If the washing machine doesn’t operate, check the power source.

Washing Machine Makes Loud Noise and Vibrates During Spin


  • Due to damaged components such as shock absorber springs, drum support parts, and bearings, or insufficient water supplied to the washing machine.
  • Due to placing the washing machine on an uneven surface, objects falling from the clothes and getting stuck in the drum.
  • Due to overloading the machine with too many clothes or clothes being unevenly distributed in the drum.


  • Make sure the washing machine is placed on a flat surface.
  • Before washing, check if there are any foreign objects in the clothes.
  • Load the recommended amount of clothes and distribute them evenly in the drum.
  • Place the washing machine 5 – 10 cm away from the wall and ensure there are no obstructions.

Read more: Samsung washing machine information and error codes

What to Consider When Troubleshooting Samsung Washing Machine Error Codes

When troubleshooting Samsung washing machine problems at home, for common errors, remember to turn off the power supply before attempting to identify the issue. However, for technical errors, contact the service center or reliable washing machine repair services. Avoid trying to fix technical issues on your own, as incorrect actions might worsen the situation.

Hope that the article above about Samsung washing machine error code list will useful for you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *